SAS250 在线式选择性焊接机技术参数SAS250 Auto Selective Soldering System
规格表 specifications | 参数 Parameter |
外型尺寸 Size | 1000L*1135W*1156H (mm) |
机器框架及外罩 Machine frame and cover | 铝型材框架+冷板喷粉 Aluminium extruded sections frame + Door |
作业高度 Operating height | 900±20mm |
重量 Weight | Approx.250KG |
电源 Power supply | 单相φ220V 50/60HZ |
总功率Total power | 5.5KW |
PCB 规格 PCB parameter | |
PCB 尺寸 PCB size | Max:330(L)*250(W)(mm) |
板面元件高度 Top component height |
Max150mm |
板底元件高度 Bottom component height |
Max15mm |
PCB 重量 PCB Weight | Max10Kg |
PCB 工艺边 PCB Process Edge | >3mm |
选择性焊接系统 Selective Soldering System | |
焊接移动方式 Welding movement mode | PCB 于 XYZ 轴上移动 PCB movement in XYZ axis |
移动方式 Movement mode | 伺服马达+直线滑轨方式 Servo motor + linear rail |
无铅锡添加方式 Solder feeding mode | 手动(可选项:自动) Manual( Option: auto) |
无铅锡容量 Solder capacity | 16KG |
熔锡时间 Solder melting time | 20min |
功率 Solder power | 3KW |
焊接喷嘴规格 Solder nozzle size | 标配 D8mm,其余规格可选配 Standard D8mm, other sizes is option |
焊接节拍时间 Solder cycle time | 3 秒/点 3 Sec/ soldered dot |
控温方式 Temperature control mode |
PID+SSR |
温度设定范围 Temperature setting range |
Max400OC |
控温精度 Temperature accuracy |
±1OC |
锡波高度 Waver height | Max 5mm |
焊锡精度 Welding precision | 0.1mm |
锡渣产生量 Solder dross | 0.2Kg/8H(无氮气保护);0.01Kg/8H(氮气保护) 0.2Kg/8H(Not N2 protection);0.01Kg/8H( N2 protection) |
Shenzhen ShunDaCheng Electronic Equipment Co.,Ltd.
工厂地址:东莞市大岭山镇颜屋颜前街北一巷 5 号
运输系统 Conveyor system | ||
传动方式 Conveyor method | 采用导轨+不锈钢滚轮方式 Adopt rail + stainless roller | |
PCB 定位方式 PCB fix method | 采用气缸+压条定位 PCB 板边 Adopt cylinder + depression bar to fix PCB edge | |
PCB 定位气缸数量 QTY of fitting PCB | 2 个 2 PCS | |
止档器数量 Stopper quantity | 2 个 2 PCS | |
氮气保护系统 N2 protection system | ||
氮气保护方式 N2 protection mode | 喷嘴及熔锡液面 Nozzle and solder pot | |
氮气消耗量 N2 consumption |
1.2M3/h | |
氮气流量控制 N2 flow control | 数显流量控制 Digital flow control | |
外部抽风系统 Exhaust system | ||
顶罩式抽风 Top cover exhaust | 客户自配 Customer supply | |
抽风管数量 Exhaust quantity | 1 个 1 PCS | |
排风量 Exhaust volume | 约 5m³/h(由客户自配外接排风通道) About 5m³/h | |
控制系统 Control system | ||
控制方式 Control mode | 触摸屏+PLC Touch screen + PLC | |
PCB 制程参数 PCB Process parameter | 于触摸屏上设定、保存、调用 Setting, save , open in the touch screen | |
蜂鸣器 buzzer | 蜂鸣器提示作业完成 Prompt sound from the buzzer | |
其它 Other | PCB 产量计数功能、故障记录、报警记录可于触摸屏上调阅 PCB counting, message, alarm can be read in the touch screen | |
可选项 Option | ||
焊接实时监控Welding real-time monitoring | ||
扫码枪Sweep gun |
咨询表单:
咨询内容:
你还没有添加任何产品